DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
Features
All characteristics
Description
Sensors DOL 26 and iDOL 26 are general sensors with a size of 18 mm that are suitable for storage tanks, bunkers and elevators. Due to the mechanical design of the DOL 26 and iDOL 26 sensors, they are ideally suited for installation in small spaces with limited space, for example, in the middle of a yearling farm in poultry farms, pigsties, barns. In this way, the sensor is kept inaccessible to creatures. Advantages • Excellent design for rural government • Various versions for different needs • Low energy consumption • Easy to cutBenefits and warranty
High quality
The equipment is manufactured by leading European manufacturers, using modern technologies and materials.
Professional support
Our specialists are always ready to provide qualified advice and assistance in choosing equipment. We also offer a full range of services from installation to maintenance and repair.
Competitive prices
Direct contracts with manufacturers allow us to offer competitive prices for all equipment. You will receive high quality at the best price.
Returns and Exchanges
We provide the opportunity to return or exchange the product within 14 days after purchase if it does not fit or has defects.
Delivery
Nova Poshta
By courier in Kiev
Pickup in Kyiv 1A Academician Korolev Avenue9
Оплата
Payment in cash
Payment Apple Pay / Google Pay
Payment by installments Monobank
Payment online Visa / MasterCard
Payment by card
Cash on delivery "Nova Poshta"
What is the DOL 26 CA-P-18-NF-CA-SCR-B-2T capacitive sensor and what is it used for?
The DOL 26 CA-P-18-NF-CA-SCR-B-2T capacitive sensor is a specialized sensor version in a smooth housing (Ø18 mm) without thread. It is designed for mounting through sealing glands (seals) or clamping clips, which is the standard for many modern poultry feeding lines.
Technically, it is a universal SCR sensor (20-280V AC/DC) with Break (NC / Normally Closed) operating logic. It opens the motor power circuit when the feed level reaches the set point. Thanks to the smooth housing, this sensor can be easily slid deeper or higher in the hopper, precisely adjusting the physical activation level.

Key advantages of the DOL 26 CA-P-18-NF-CA-SCR-B-2T capacitive sensor
- Smooth Housing. The absence of thread prevents the accumulation of dirt and feed dust in the turns, which significantly simplifies washing and disinfection (highest hygiene level).
- Depth adjustment. Unlike threaded models that are fixed by nuts at one point, this sensor can be moved up and down in the mount, changing the "Stop" level without readjusting the electronics.
- Break (NC) Logic. Ensures safety: if the cable is chewed or contact is lost, the system will automatically stop, preventing feed overflow.
- Full settings (2T). Equipped with sensitivity and time delay trimmers, allowing it to be adapted to any type of feed.
Applications of the DOL 26 CA-P-18-NF-CA-SCR-B-2T capacitive sensor
This model is ideally suitable for specific mounting conditions:
- Plastic feeders with glands. Where the sensor is simply inserted into a rubber seal.
- Control pans with clips. Quick installation and removal without turning nuts.
- Systems with high sanitary requirements. Smooth plastic is easier to wash under high pressure.
- Replacement of mechanical sensors. Connected by two wires in the 220V circuit break.
Why choose the DOL 26 model in smooth housing (Ø18)
Choose this model if your equipment involves "clip-on" mounting or if you want to be able to mechanically adjust the sensor activation height.
| Parameter | Value for this model |
|---|---|
| Housing type | Smooth Ø18 mm (unthreaded) |
| Output type | SCR (20-280V AC/DC) |
| Logic | Break (NC / Normally Closed) |
| Settings (2T) | Sensitivity + Time |

Mounting and connection of DOL 26 CA-P-18-NF-CA-SCR-B-2T
- Fixation: Insert the sensor into the mounting hole with the seal. Adjust the height so that the active zone is at the desired filling level, and tighten the clamp/gland. Do not use nuts (there is no thread on the housing).
- Connection (2 wires): Connect the sensor in series with the load (relay coil). Remember that this is NC (Break) logic — in the absence of feed, the contact will be closed.
- Settings: Open the trimmer cover. Adjust "Delay" to avoid frequent motor start-stops, and "Sens" for the specific type of feed.
Comparison of smooth (Ø18) and threaded (M18) housings
Why it is important not to confuse these two versions:
| Characteristic | Smooth Ø18 (This model) | Threaded M18 (Standard) |
|---|---|---|
| Mounting method | Clamp / Gland / Clip | Nuts (screwed on) |
| Height adjustment | Free (sliding) | Limited (need to turn nuts) |
| Hygiene | High (no thread for dirt) | Medium (dirt in threads) |
If your feeder has a rubber seal for inserting the sensor — you need exactly this unthreaded model.

Features DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
All characteristics
Reviews (6)
Buy together with DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
Specification DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
Відео with DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
Reviews DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
Questions DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108
There are no reviews for this product.
DOL 26 amniotic grain sensor CA-P-18-NF-CA-SCR-B-2T, 105108


