Manual tile cutter PROFI EVO 63 BATTIPAV (6601EV)

Description

Battipav PROFI EVO 63 - manual machine for cutting floor and wall tiles. Designed for cutting tiles with a maximum cutting length of 630 mm. Designed for straight and diagonal cutting of ceramic tiles and porcelain stoneware using the "from itself" method. Advantages of the Battipav PROFI EVO 63 tile cutter: the base of the tile cutter is made of durable aluminum for a long service life; the goniometric ruler is made of a monoblock, which provides a very durable design, and also makes it possible to clearly see measurements at the same level as the tile; the angular millimeter ruler provides cutting at an angle of up to 45°C; unlimited possibilities - thanks to the long guide strip, you can use tiles measuring 320x320 mm; equipped with an additional side stop, which moves and allows you to accurately cut tiles with a straight and diagonal cut; the tabletop is equipped with special springs that allow you to break the tile without various chips along the seam; the cutting block on bearings slides easily along the rail, and for an even cut, the cutting part is equipped with a stop that helps to separate the cut halves; the special design of the leg with a magnet ensures cutting and breaking in one motion - after cutting, the leg is in place for breaking; the stop for breaking is also made of aluminum and is equipped with a special rubber pad at the end to prevent scratches on the tile; the side stops provide maximum stability of the tile cutter and make it possible to work with large tile sizes. Battipav PROFI EVO 63 is a reliable manual tile cutter for quick work with tiles directly at the installation site.