MULTIKLIN AQUA, 25 ml, detergent and disinfectant, ZVK SELO (WV0045)

Description

The drug has bactericidal, fungicidal and virucidal effects, is used for manual and machine washing, filling disinfectant barriers and disinfectant mats, disinfection of transport and premises, sanitation of premises in the presence of animals. Retains its activity in intense light, when using hard water, in the presence of organic materials (feed residues, animal excretions, etc.). Characteristics: complex detergent and disinfectant. Pharmaceutical properties: disinfectant "Multiklin Aqua" is a complex detergent and disinfectant. The drug retains its activity in intense light, when using hard water, in the presence of organic materials (feed residues, animal excretions, etc.). It has a bactericidal (Staphylococcus aureus, Streptococcus faecalis, Pseudomonas aeruginosa, E. coli, Klebsiella pneumonia, Proteus mirabilis, Listeria monocytogenes, Mycoplasma spp.), fungicidal (Candida spp., Aspergillus spp., Fusarium spp., Penicillium spp.) and virucidal (Newcastle disease virus, Reovirus, Rotavirus, Coronavirus, Paramyxovirus, Poxvirus, Orthomyxovirus, Pestivirus) effect. Shelf life: 3 years. Storage conditions: dry, dark, ventilated room at a temperature of 0°C to +30°C. Form of release: 1 liter can. Compatibility of the working solution with materials: metals - steel, stainless steel, galvanized surfaces, non-ferrous metals and their alloys; plastics - polyethylene, polypropylene; others - glass, ceramics. Contraindications: do not use together with detergents and acids. If the product gets into the eyes, on the skin or in the oral cavity, rinse with a 2% solution of baking soda and plenty of water. It is forbidden to smoke, drink, or eat while working with the product. Composition: isopropyl alcohol, polyhexamethylenebiguanidine hydrochloride, water, alkyldimethylbenzylammonium chloride (benzalkonium chloride), glutaraldehyde, didecyldimethylammonium chloride. Method of application: “Multiklin Aqua” retains its activity in intense light, when using hard water, in the presence of organic materials (feed residues, animal excretions, etc.). Effective in a wide temperature range (from 0° to 50°C). At temperatures below 0°C, it is recommended to add antifreeze, which allows the use of “Multiklin Aqua” even at temperatures down to -20°C. Machine or manual disinfection/washing: w/w concentration – 0.25–1%; the maximum effect is achieved when using high-pressure cleaners of the “Kärcher” type and others. Foam washing: concentration of the solution – 0.5–1%; consumption – 1 l of the solution per 4–6 m² of surface; desired temperature of the solution – 10–20°C; exposure – 20–30 min. When these parameters are observed, the consumption of the product is significantly reduced and visual control of the quality and completeness of its application is ensured. High-pressure cleaners of the “Kärcher” type are used using a foam nozzle. Aerosol disinfection: carried out by the method of highly dispersed aerosol spraying (fogging). To achieve a bactericidal effect, a 20% working solution of the drug is used at the rate of 5 ml per 1 m³ of the room or a 5% solution at the rate of 20 ml per 1 m³. Disinfection of vehicles used for transporting animals, raw materials and finished products: carried out with a 0.25% disinfectant solution at a rate of 0.35 l/m² and an exposure time of 20 minutes. Filling of disinfectant barriers and disinfectant mats: use a 0.5% working solution of the drug, which is changed as it becomes dirty or dries out every 7 days. Treatment of litter: use a 5% working solution of the drug at the rate of 12 l per 1 t of sawdust/straw. The agent is applied by spray when forming litter on a pig farm or poultry farm. Disinfection of incubators: for incubation equipment, a 0.5% solution is used using foam-generating equipment, by irrigation or wiping. For incubation eggs, a 5% solution is used at the rate of 20 ml per 1 m³ by irrigation. Recommended equipment is “cold fog” generators. Sanitation of premises in the presence of animals: treatment is carried out with a 0.5% solution, consumption rate - 2–5 ml of working solution per 1 m³. Treatment is carried out with ventilation turned off. If it is impossible to completely turn off ventilation or create airtight conditions in the room, the volume of working solution can be increased to 25 ml per 1 m³. Features of working with the drug: preparation of working solutions should be carried out in a ventilated room where there is water.