PV1 brown wire 6 EUROPAN CABLE (T024896)

Description

PV1 Brown Wire 6 EUROPAN CABLE PV1 – wire with a copper core with polyvinyl chloride insulation. Applications It is designed for electrical installations with stationary installation in lighting and power networks, as well as for installation of electrical equipment, machines, mechanisms and machines at a rated voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of up to 1. It is used for laying in steel pipes, hollow channels of building structures, on trays, for the installation of electrical circuits, for the installation of lighting networks indoors, for laying non-movable power lines. If it is necessary to perform external wiring, it is necessary to use trays, boxes, cable channels that protect the wire from mechanical damage and ultraviolet radiation. Design Conductive conductors are copper, single-wire or multi-wire (class 1, 2 of DSTU EN 60228). Insulation of cores made of polyvinyl chloride plastic. Operation The wires are designed for operation at ambient temperatures down to -50°C, relative humidity up to 100% at temperatures up to 35°C. The wire can be laid without preheating at a temperature not lower than -15°C. The minimum bending radius during installation must be at least 10 times the outer diameter of the wire. The long-term permissible heating temperature of the wire cores during operation is 70°C.