PVSE wire 3x1.5 EUROPAN CABLE (6861)

Description

Wire PVSE 3x1.5 EUROPAN CABLE PVSE is a wire with twisted cores, polyvinyl chloride insulation, a common screen of alumoflex (aluminum foil) and a polyvinyl chloride sheath, flexible. Scope Designed for connecting electrical machines and appliances for household and similar use to the electrical network with a rated alternating voltage of up to 450/750 V in places where protection from external electromagnetic radiation is required. Used for stationary installation of electrical devices, connecting mobile mechanisms and devices to electrical networks, for the manufacture of extension cords, in places where it is necessary to reduce the impact of external electromagnetic radiation, as well as reduce the noise level and minimize the impact on surrounding electrical appliances. Construction Conductor cores – copper, multi-wire (class 5 DSTU EN 60228). Insulation made of polyvinyl chloride plastic compound. General screen made of alumoflex (aluminum foil). Sheath – polyvinyl chloride plastic compound. Operation The wire is designed for operation at ambient temperatures from -25°C to +40°C. The wire can be laid without preheating at a temperature not lower than -20°C. The minimum bending radius during operation must be no less than: - for wires with a cross-section of conductive cores of 0.75 and 1.0 mm2 - 120 mm; - for wires with a cross-section of conductive cores of 1.5 and 2.5 mm2 - 160 mm; - for wires with a cross-section of conductive cores 4.0 - 16 mm sq. - 300 mm. The permissible heating temperature of the wire cores during operation is 70°C.