-180x100.png)
Rack and pinion drive TU6-22 Ridder (500019)
Rack and pinion drive TU6-22 Ridder (500019)
In stock in Europe
Article: 500019
633 ₴
Features
Brand
A turning point
350 Nm
Material
Stainless steel
Producing country
Netherlands
Weight, kg
0.5
All characteristics
Description
TU6-22/30 rack and pinion actuators with a corresponding sheet steel rack are maintenance-free actuators for the operation of vents and vents, etc. These rails are built into a galvanized sheet steel housing and feature a hardened gear, plastic pipe bearings, and plastic guide rollers. TU6-22/30 rack and pinion gears can be mounted on 1" tubular shafts (diameter 33.7 mm, minimum wall thickness 2.5 mm). Here, the gear is mounted on the tubular drive shaft with two set screws (tightening torque 8 Nm) The TU6-22/30 rack and pinion drive can be used with Ridder sheet steel racks with a height of 22 mm (TU6-22) and 30 mm (TU6-30). Both straight and curved sheet steel racks can be used with these rack drives.Benefits and warranty
High quality
The equipment is manufactured by leading European manufacturers, using modern technologies and materials.
Professional support
Our specialists are always ready to provide qualified advice and assistance in choosing equipment. We also offer a full range of services from installation to maintenance and repair.
Competitive prices
Direct contracts with manufacturers allow us to offer competitive prices for all equipment. You will receive high quality at the best price.
Returns and Exchanges
We provide the opportunity to return or exchange the product within 14 days after purchase if it does not fit or has defects.
Delivery
Nova Poshta 
By courier in Kiev 
Pickup in Kyiv 1A Academician Korolev Avenue9
Оплата
Payment in cash
Payment Apple Pay / Google Pay
Payment by installments Monobank
Payment online Visa / MasterCard
Payment by card - Cash on delivery "Nova Poshta"
Features Rack and pinion drive TU6-22 Ridder (500019)
A turning point
350 Nm
Material
Stainless steel
Producing country
Netherlands
Weight, kg
0.5
Reviews (0)
There are no reviews for this product.
Buy together with Rack and pinion drive TU6-22 Ridder (500019)
Specification Rack and pinion drive TU6-22 Ridder (500019)
A turning point
350 Nm
Material
Stainless steel
Producing country
Netherlands
Weight, kg
0.5
Rack and pinion drive TU6-22 Ridder (500019)
633 ₴
Reviews Rack and pinion drive TU6-22 Ridder (500019)
There are no reviews for this product.
Rack and pinion drive TU6-22 Ridder (500019)
633 ₴
Questions Rack and pinion drive TU6-22 Ridder (500019)
There are no reviews for this product.
Rack and pinion drive TU6-22 Ridder (500019)
633 ₴
Similar products
L20D6S68 Ridder Window Bracket Kit (500021)
500021
Material: Aluminum
Producing country: Netherlands
Weight, kg: 0.05
In stock in Europe
46 539 882 ₴
46 539 882 ₴
TU21-40PINIONHOUSEUNIT Ridder (500040)
500040
Material: Stainless steel
Producing country: Netherlands
Weight, kg: 0.62
In stock in Europe
1 611 ₴
1 611 ₴
Rack and pinion drive clutch PH40-3B27 Ridder (500208)
500208
Diameter, mm: 27
Material: Galvanized steel
Producing country: Netherlands
Weight, kg: 0,41
In stock in Europe
448 ₴
448 ₴
Rack and pinion drive clutch PH40-3B32 Ridder (500209)
500209
Diameter, mm: 32
Material: Galvanized steel
Producing country: Netherlands
Weight, kg: 0,46
In stock in Europe
538 ₴
538 ₴
KOPPSTUKSETPH40B32x1.9ST Ridder (500232)
500232
Producing country: Netherlands
In stock in Europe
1 520 ₴
1 520 ₴
Recommended
DOL 45R capacity sensor 10-30V AC/DC, 100682
100682
Cable type: Ul2517
Delay time: Adjustable from 0 to 240 min. Factory setting - 30 sec.
Frequency: 50-60 Hz
IP protection class: 67ip
Length of cable: 1.5 m
Output type: NO or NC
Producing country: Denmark
In stock in Europe
3 892 ₴
3 892 ₴
Mixtron dispenser 0.5 - 4 % (MX.075.P054)
MX.075.P054
Consolidation: Viton, EPDM Viton EXT
Dosage range: 0.5 – 4%
Maximum static pressure, bar: 10
Maximum throughput, l/h: 750
Minimum dosage ratio: 1:200
Producing country: Italy
Temperature range: 5°- 40°C
In stock in Europe
24 757 ₴
24 757 ₴
Chicken feeder Codaf Gio T/F grid anti-roosters, tall cone (CDF037/B-034-NW-GR)
CDF037/B-034-NW-GR
Bird species: Chickens
Material: Plastic
Number of sections: 14
Producing country: Italy
Type: Automatic feeder
In stock in Europe
581 ₴
581 ₴
Roxell Boozzter feeder (VAD914829)
VAD914829
Bird species: Roosters
Material: Plastic
Number of sections: 10
Producing country: Belgium
Type: Automatic feeder
Check availability
4 193 ₴
4 193 ₴
Feeder for chickens Big Dutchman TRU PAN (11-31-4159)
11-31-4159
Bird species: Chickens
Material: Plastic
Number of sections: 4
Producing country: Germany
Type: Automatic feeder
Check availability
15 459 ₴
15 459 ₴
Winterwarm DXB 120kW PDX12A0NLO Oil Heater
PDX12A0NLO
Air volume: 0m3/h - 7000m3/h
Burner controller high/low: None
Burner controller, modulating: None
Capacity: 120 kW
Closed version: None
Connection, fuel: External thread
Control signal 0-10 V: None
In stock in Europe
136 085 ₴
136 085 ₴
Products viewed
FAQ
Yes, we provide a full range of equipment installation and configuration services. Our specialists will ensure professional installation and optimization of the equipment according to your needs.
We offer a wide range of equipment for industrial livestock farming, including feeding automation systems, ventilation systems, water supply and drainage systems, cooling and heating systems, as well as lighting and climate control systems.
Yes, we provide maintenance and repair services for equipment after the warranty period has expired. Our service center will provide prompt and high-quality repairs, as well as regular maintenance of your equipment.