DOL 26 capacity sensor CA-P-M18-NF-CA-SCR-B-2T, 105138

What is the capacitive sensor DOL 26 CA-P-M18-NF-CA-SCR-B-2T and its features?

The capacitive sensor DOL 26 CA-P-M18-NF-CA-SCR-B-2T is the most functional model for fixed installation in AC networks. It combines the reliability of a threaded M18 housing, universal SCR power supply (20-280V), and complete flexibility of settings thanks to two trimmers (2T).

Unlike smooth versions, this sensor is rigidly fixed with nuts, eliminating displacement due to vibration. And unlike the simplified 0T models, here you have full control over parameters: you can adjust both sensitivity to feed and the off-delay time (NC/Break).

Advantages of the DOL 26 CA-P-M18-NF-CA-SCR-B-2T sensor

• Vibration Resistance (M18). The threaded mount allows the sensor to be tightened securely onto the hopper wall. This is critical for auger lines where constant shaking can push a standard smooth sensor out of its mount.
• Adaptability (2 Trimmers). You can precisely tune the sensor for "difficult" feeds (e.g., dusty meal or light husks) and adjust the delay to avoid frequent motor starts.
• Universal (SCR). Works with any voltage (AC/DC 20-280V), making it ideal for repairing and retrofitting old systems without rewiring.
• Break Logic (NC). Reliably stops the line when full, ensuring process safety.

Where this model is used (M18 SCR 2T)

This sensor is the #1 choice for difficult conditions:

• Hoppers with strong vibration. Where smooth sensors constantly shift or fall out.
• Handling different feed types. Where sensitivity needs periodic adjustment.
• Control cabinets without 24V. Direct connection to 220V or 110V starters.
• Thin-walled plastic tanks. Where it is convenient to clamp the wall between two sensor nuts.

Why choose the threaded adjustable model

This is a compromise between mechanical mounting reliability and electronic flexibility. You get the stability of hardware and the intelligence of electronics in one housing.

Installation of DOL 26 CA-P-M18-NF-CA-SCR-B-2T

1. Fixing: Insert the sensor into the hole and tighten the nuts on both sides. This ensures tightness and mechanical strength.
2. Electrical: 2-wire connection (series).
3. Adjustment (2T): Remove the cap. Adjust "Time" so the motor doesn't start from feed waves, and "Sens" so the sensor clearly sees the difference between an empty and full hopper.

Comparison with other threaded models

Advantage of the 2T version over 0T:

Choose the M18-2T model if you need maximum mounting reliability and full process control.