We have more than 100,000 pieces of equipment! Contact our manager and get a full catalog and consultation!

Catalog
0

Your shopping cart is empty!
€ 54.05
$ 45.42

Spare parts for medicators: how to extend the life of equipment on the farm

Farmers understand the importance of medicators better than anyone else, because it is difficult to do without them. This equipment works every day, and any malfunction can stop the entire cycle of caring for poultry and animals. But the good news is that most breakdowns can be easily fixed — all you need to do is replace the parts in time. 

Why are spare parts for medicators needed?

A medicator is a special dispenser that adds the exact amount of vitamins, probiotics or medicines to the water. It is a kind of dosing pump. A medicator saves on medicines because they are administered in the exact required dose, without having to measure them by eye. This way, the entire livestock receives uniform treatment or prevention. It also makes the staff's work easier, as there is no need to manually mix dozens of buckets of solution. 

But! Even the highest quality medicator wears out over time, and seals, membranes, and valves often fail. Do you always need to buy a new device? Of course not. If the problem can be solved by replacing a part, it is much cheaper, and work can resume more quickly. In addition, most manufacturers produce repair kits, so finding the right parts is not a problem. 

Types of spare parts for medicators

Medicators have several key components, and it is these that determine the quality of their performance. So what parts of this device need to be replaced?

  • Membranes are the main element responsible for dosing accuracy. They wear out quickly, especially when exposed to hard water or frequent use. 
  • Inlet or outlet valves regulate the flow of water and medication. If they malfunction, the medicator will release excess water or medication, which must be avoided. 
  • Seals and rings ensure tightness, but over time they lose their elasticity, which causes leaks. 
  • Filters protect against dirt and impurities in the water. A clogged filter is often the cause of medikator failure. 
  • Pistons and springs work under load, gradually lose their shape and break. 
  • Housing parts (holders, covers, water connection fittings). 

Among all these spare parts, membranes, valves, seals and filters most often need to be replaced. If you regularly inspect the medicator and replace parts in a timely manner, you can avoid interruptions in its operation. 

Where medicators and their spare parts are used

It is difficult to imagine a poultry or any other animal farm without it. This is because medicines, vitamins or disinfectant solutions need to be administered to all animals, and the easiest way to do this is through a drinking system. Therefore, farmers must have spare parts, especially where medicators are actively used. 

On cattle farms, this equipment is used to administer vitamin and mineral supplements, probiotics and intestinal disease preventatives through the water. 

In piggeries, medicators are often used to feed piglets after weaning and to prevent diseases during fattening. The most important thing is the high requirements for dosing accuracy for any type of animal or poultry. 

In industrial poultry houses, medicators are also used to treat and maintain the immunity of broilers, layers, turkeys, and quails. Farms are increasingly using automated bird watering systems to reduce labour costs and improve hygiene in poultry houses. By the way, you can purchase any necessary equipment for poultry farming from VADA. 

How to choose spare parts for medicators

This is not so simple, as there are several important criteria that affect the effectiveness of the medicator and its service life. 

  1. Focus on the model and manufacturer of the medicator, because each part may differ even in size. Using universal spare parts can lead to inaccurate dosing or even breakage. It is best to buy original or certified analogues from trusted suppliers. 
  2. Take into account the operating conditions: water hardness, frequency of use, temperature conditions. 
  3. The material of the parts is also very important, as high-quality elastomer membranes last longer than cheap silicone ones. And premium rubber seals are better at withstanding pressure drops. 

I would like to emphasise once again the importance of having repair kits in stock — this will ensure that your farm operates without fail. 

To ensure that the medicator functions for a long time and without interruptions, you should follow a few simple rules. 

Check the valves and membrane regularly. 

Monitor the cleanliness and quality of the water. Be sure to install a filter before the medicator — it will protect the internal parts from sand, rust and other mechanical impurities. In addition, flush the filter frequently and replace it if necessary. 

Wash the equipment after each course of medication, as residues in the system quickly damage seals and membranes. After feeding, it is recommended to run clean water through the medicator. 

Do not exceed the pressure, as each model has its own permissible range. Excessive pressure shortens the service life of parts.   

Remember, a well-maintained medicator means healthy livestock thanks to its proper functioning. 

Where to buy spare parts for medicators in Ukraine?

When it comes to repairing a medicator, it is important to understand that not every part will fit. Cheap or unsuitable spare parts can quickly fail and stop the entire equipment from working. This poses a risk to animal health and unnecessary costs for the farm. 

That is why it is important to choose reliable solutions. At VADA, you will find proven medicators and original spare parts for them. This equipment is designed for intensive use and has already proven its effectiveness in practice by farmers. The range also includes other equipment for livestock and poultry farming: drinkers, watering lines, and water supply systems for poultry and animals.

In animal husbandry, there is no room for experimentation with questionable components — after all, the stable operation of the watering system affects not only convenience but also the health of the entire livestock.

Order spare parts for medicators from VADA — call us or leave a request on the website, and we will help you choose the best components for the smooth operation of your farm.

Filters
Adjusting sleeve PPDI036 for Dosatron D3 (1002PPDI036)
1002PPDI036
Appointment: For D3RE2 series medicators Producing country: France
In stock in Europe
2 203 ₴
2 203 ₴
Anti-rotation ring PDI751 for Dosatron DIA4 (1002PDI751)
1002PDI751
Appointment: For DIA4 series medicators Producing country: France
In stock in Europe
364 ₴
364 ₴
Bottom valve Mixtron 0.2..2% (V)
00-00005100
Producing country: Italy Volume, %: 0.2...2
In stock in Europe
1 ₴
Check the price
Bracket PDI703 for Dosatron D3 (1002PDI703)
1002PDI703
Appointment: For D3RE2 series medicators Producing country: France
In stock in Europe
1 505 ₴
1 505 ₴
Ceramic tile MDI387 for Dosatron DIA4 (1002MDI387)
1002MDI387
Appointment: For DIA4 series medicators Color: White Material: Ceramics Producing country: France
In stock in Europe
8 555 ₴
8 555 ₴
Check valve block PJDI118 for Dosatron D3RE5 (before change3)
do zmiany3
Appointment: For D3RE5 series medicators Producing country: France
In stock in Europe
30 356 ₴
30 356 ₴
Check valve block PJDI118VF for Dosatron D3 (1002PJDI118VF)
1002PJDI118VF
Appointment: For D3RE5/D3RE10 series medicators (16mm) Producing country: France Purpose for the substance: PH 1-9
In stock in Europe
7 019 ₴
7 019 ₴
Check valve nut PDI734 for Dosatron D3 (1002PDI734)
1002PDI734
Appointment: For D3GL2/D3RE2 series medicators Producing country: France
In stock in Europe
485 ₴
485 ₴
Check valve PJDI115 for Dosatron D3 (1002PJDI115)
1002PJDI115
Appointment: For D3RE2 series medicators Producing country: France Type of substances: Alkaline
In stock in Europe
4 649 ₴
4 649 ₴
Conical seal JDI013 for Dosatron D25RE5 (1002JDI013)
1002JDI013
Appointment: For medics of the D25RE5 series Producing country: France Purpose for the substance: PH 1-9 Type of substances: Alkaline
In stock in Europe
881 ₴
881 ₴
Diaphragm PJDI127 for Dosatron DIA4 (1002PJDI127)
1002PJDI127
Appointment: For DIA4 series medicators Producing country: France
In stock in Europe
7 065 ₴
7 065 ₴
Dome housing seal JDI001 for Dosatron D3 (1002JDI001)
1002JDI001
Appointment: For D3RE5/D3RE2/DI-16 series medicators Producing country: France
In stock in Europe
303 ₴
303 ₴
Dosatron D25 Engine Lower Valve Assembly MP177VF
MP177VF
Producing country: France
In stock in Europe
4 017 ₴
4 017 ₴
Dosatron D25RE2 watering dosing kit (PJ093VF)
PJ093VF
Producing country: France
In stock in Europe
5 490 ₴
5 490 ₴
Dosatron DI-16 fitting (1002PJDI06)
1002PJDI06
Producing country: France
In stock in Europe
2 552 ₴
2 552 ₴
Dosatron DI16 conical lip seal JDI011VF (1002JDI011)
1002JDI011
Producing country: France
In stock in Europe
638 ₴
638 ₴
Dosatron DIA4 8J040VF seal (100208J040)
100208J040
Appointment: For DIA4 series medicators Producing country: France
In stock in Europe
3 632 ₴
3 632 ₴
Dosatron DIA4 JDI122 seal (1002JDI122)
1002JDI122
Producing country: France
In stock in Europe
2 477 ₴
2 477 ₴
Dosatron DIA4 JDI127HT pump housing gasket (1002JDI127)
1002JDI127
Producing country: France
In stock in Europe
1 094 ₴
1 094 ₴
Dosatron DIA4 JDI129HT transfer case gasket (1002JDI129)
1002JDI129
Producing country: France
In stock in Europe
1 458 ₴
1 458 ₴
  • Сторінка
  • 1
  • 2
  • 3
  • 4
  • 5
Showing 1 to 20 of 91 (5 Pages)
Recommended
DOL 45R capacity sensor 10-30V AC/DC, 100682
100682
Cable type: Ul2517 Delay time: Adjustable from 0 to 240 min. Factory setting - 30 sec. Frequency: 50-60 Hz IP protection class: 67ip Length of cable: 1.5 m Output type: NO or NC Producing country: Denmark
(6)
In stock in Europe
3 892 ₴
3 892 ₴
Mixtron dispenser 0.5 - 4 % (MX.075.P054)
MX.075.P054
Consolidation: Viton, EPDM Viton EXT Dosage range: 0.5 – 4% Maximum static pressure, bar: 10 Maximum throughput, l/h: 750 Minimum dosage ratio: 1:200 Producing country: Italy Temperature range: 5°- 40°C
(1)
In stock in Europe
24 757 ₴
24 757 ₴
Chicken feeder Codaf Gio T/F grid anti-roosters, tall cone (CDF037/B-034-NW-GR)
CDF037/B-034-NW-GR
Bird species: Chickens Material: Plastic Number of sections: 14 Producing country: Italy Type: Automatic feeder
(1)
In stock in Europe
581 ₴
581 ₴
Roxell Boozzter feeder (VAD914829)
VAD914829
Bird species: Roosters Material: Plastic Number of sections: 10 Producing country: Belgium Type: Automatic feeder
(1)
Check availability
4 193 ₴
4 193 ₴
Feeder for chickens Big Dutchman TRU PAN (11-31-4159)
11-31-4159
Bird species: Chickens Material: Plastic Number of sections: 4 Producing country: Germany Type: Automatic feeder
(1)
Check availability
15 459 ₴
15 459 ₴
Winterwarm DXB 120kW PDX12A0NLO Oil Heater
PDX12A0NLO
Air volume: 0m3/h - 7000m3/h Burner controller high/low: None Burner controller, modulating: None Capacity: 120 kW Closed version: None Connection, fuel: External thread Control signal 0-10 V: None
In stock in Europe
136 085 ₴
136 085 ₴
Products viewed
FAQ
Yes, we provide a full range of equipment installation and configuration services. Our specialists will ensure professional installation and optimization of the equipment according to your needs.

We offer a wide range of equipment for industrial livestock farming, including feeding automation systems, ventilation systems, water supply and drainage systems, cooling and heating systems, as well as lighting and climate control systems.

Yes, we provide maintenance and repair services for equipment after the warranty period has expired. Our service center will provide prompt and high-quality repairs, as well as regular maintenance of your equipment.